<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%> 浪潮机器
landward
Home About Us Client Cases

Products & Services

Support News Contact Us
 
  Products & Services  
  >> Single screw air compressor
    > Air-cooling series
    > Water-cooling series
  >> Twin-screw air compressor
    > Air-cooling series
    > Water-cooling series
  >> Frequency conversion air compressor
  >> Mobile compressor
  >> Low pressure screw air compressor
  >> After processing equipment
   
> Refrigeration dryer
> Adsorption dryer
- Design features
- Specification、Parameters
- Combined
> Filter
> Others
 
  Adsorption dryer    
  landward  
 
 
Specification of adsorption dryer
 
Technical parameters of no heat adsorption dryer Technical parameters of micro-heat adsorption dryer
Air intake air temperature:≤40℃
Rated working pressure:0.7Mpa(0.4-0.95Mpa允许使用,
                            45Mpa以下接受订货)
压力降:<0.02Mpa
Pressure dew point:-40℃(0.7Mpa)(-60℃以下接受订货)
Regenerate mode:无热再生
Control mode:全电子可编程序时间控制
再生气耗:约13%-15%处理量
Absorbent:活性氧化铝(DPD-68℃以下时,活性氧
                化铝加分子筛)
Oil content:<0.1mg/m³
Installation mode:室内,无基础,混凝土地面找平,环境温度>0℃
Air intake air temperature:≤40℃
Rated working pressure:0.7Mpa(0.4-0.95Mpa允许使用,
                            45Mpa以下接受订货)
压力降:<0.02Mpa
Pressure dew point:-40℃(0.7Mpa)(-60℃以下接受订货)
Regenerate mode:微热再生
Control mode:全电子可编程序时间控制
再生气耗:约5%-8%额定处理量
Absorbent:活性氧化铝(DPD-68℃以下时,活性氧
                化铝加分子筛)
Oil content:<0.1mg/m³
Installation mode:室内,无基础,混凝土地面找平,环境温度>0℃
 
    Copyright 2010 @ shanghailandward rights reserved