◆According to he expert accurate calculation, the design parameters of refrigeration and air system are left margin above 20%.
◆Pipeline system was used galvanized seamless steel pipe, working pressure is from 0.2Mpa to 5Mpa for your selection.
◆Stainless steel pipe is acid and alkali corrosion resistance and it is suitable for pharmaceutical, food industry.
◆The inside and outside wall of air heat exchanger are all corrugated pipe, it can increase the utilization rate of cold, good at the warm come back, no condensation.
◆The evaporator is made of thin-walled copper tube with pure aluminum fins for hydrophilic treatment, It IS he spoiler structure, high efficiency of heat exchange.
◆The applying of steam- water separator which like the window-shades, rebound ,centrifugal effect, The efficiency of water diversion will be improved more than 98%.
◆Various forms of (single,gather, unite control, PC board, frequency) control circuit can meet different demand of the users to choose.
◆The key parts of the air compressor are used international famous brand, the service life can be 3 to 5 years.
◆Import cooling fan, big air volume, low noise, long life even frequent start-stop.
◆Bearing parts are designed,made, inspected,leave the factory with the card by the standard of GB151-99.
◆The condenser of water-cooling compressor is made of low fin copper pipe, slow water flow, multi - stroke, and there is no special requirements to water quality, no incrustation scale even long-term use.
◆Install the automatic drainage device according to the requirement, there are different kinds for your choose like water clean up and energy saving, good effect, floating ball , electronic timing.
◆Over current, overload,high / low pressure of refrigerant display, protection, it can choose the inlet / outlet / water temperature, high / low pressure and dew point protection.
◆The cold will loss a litter is you used the flame retardant insulation material of Armstrong.
◆Compressor protection class is IP54 (dust and splash.). |
